Adhesion resin UNIRESIN
UNIRESIN adhesive resin
MORTADD-UNIRESIN-10LTR
Register now and access more than 125,000 products
- Transparent film, does not stain adjacent surfaces
- Excellent adhesion properties
- Slow reticulation allows for adhesion to be maintained after 3 to 4 days from application
- Maintains flexibility and adhesion at low temperatures, 0ºC
- Can be repainted with aqueous and solvent-based products
- Water resistant
- Apply directly, do not dilute
Depending on the characteristics of the support, finish and thickness applied, consumption can vary between 0.165 kg/m² – 0.125 kg/m². A 25 kg pack covers an application of 150 to 200 m².
This information is intended to provide the best practice advice possible, based on our knowledge and experience. We cannot accept responsibility for individual applications, due to its numerous applications and storage and application conditions that are beyond our control. This also applies when using the free technical and sales customer support we provide. We always recommend that you test the product first. We guarantee the consistent quality of our products. We reserve the right to make technical alterations and improvements. See the data sheet for more information.
Datasheets(X)
- New plaster connection over old plaster
- Application of fresh mortar on hardened concrete
- Plaster partitions, dry walling and concrete pillars
- Self-levelling mortar union bridge over old floors
- Combined with synthetic geotextiles
- Can be applied to the sealing and fixing of materials that lose their adhesion due to ageing: glazed, artificial stone, placated and others
- Bonding of solvent-sensitive materials: Polystyrene, polyethylene and open-cell polyurethane
- Adhesive bridge for mortars designed
Apply to surfaces that are clean and free from dust, grease and other materials that impair adhesion. Can be applied on damp surfaces, but not wet surfaces. Remove residue from surface cement, paint and other debris. Apply using a brush, roller or gun in an ample coat, but avoid excessive thickness. In the event of applications over multiple days, avoid hardening to prevent adhesion loss. Do not apply to surfaces with silicone removal products or water-repellents. Can be mixed with clean sand or silica to improve adhesion on concrete. Allow to dry for approximately 1 hour before joining with other materials.
Contents | 10 l |
Colour | Colourless |
Chemical basis | Concentrate on acid base |
Product weight (per item) | 10.000 kg |
Last viewed
Twist drill bit HSCo DIN 338 Type RN MFD VARIO
Twist drill bit HSCo DIN 1869 R2 type RN
Double nipple, imperial thread
Hexagonal bolt with thread up to the head ISO 4017, steel 8.8, plain
Pan head tapping screw, C shape with H recessed head DIN 7981, steel, zinc-plated, blue passivated (A2K), shape C, with tip
1/2 inch socket wrench insert metric, hexagon, short
Hexagonal nut, low profile DIN 439, A4 stainless steel, plain
Bow saw blade with pointed toothing
Threaded fitting DIN 976-1 (shape A) with standard metric ISO thread, zinc-plated steel 4.8, blue passivated
Hexagon head sealing plug with collar, imperial DIN 910, steel, zinc-plated, blue passivated (A2K)