Abrasive fleece matting body
Sanding fleece matting body
MATBDY-FLC-G100-60X40X6MM
Register now and access more than 125,000 products
- At high rotation speeds, coarse grain acts finer, and at low speeds fine grain acts coarser
- Use tools with a low contact pressure; heavy contact pressure causes premature wear
- If there is insufficient chip removal, do not increase the contact pressure. Instead, use coarser grains
Datasheets(X)
Diameter x width x shaft diameter | 60 x 40 x 6 mm |
Max. rotation speed | 10000 1/min |
Max. recommended rotation speed | 5000 1/min |
Material to be processed | Wood, Forged steel, Malleable cast iron, Grey cast iron, C-steel, Deep-drawn steel, Steels bands, Injection-moulded zinc, Non-ferrous metal, Cr-Ni and other stainless steels |
Last viewed
Hexagon socket set screw with truncated cone ISO 4026 steel 45H, zinc-plated blue passivated (A2K)
Eccentric fitting 22
Anti-puncture wheel for Carro 3 - Motion Würth
Hexagonal bolt with thread up to head ISO 4017, hot-dip galvanised 8.8U steel (TZN)
High Power battery
Impact insert
Cover caps for cam lock nut 22
Hard-pressed compact fleece disc
HTS high-temperature lubricant
Mid side bolt for cam lock nut 15