Abrasive fleece matting body
Sanding fleece matting body ZEBRA
MATBDY-FLC-280-FINE-40X25X6MM
ZEBRA
Register now and access more than 125,000 products
Quick and shoulder-free
Double-impregnated abrasive fleece achieves the required sanding pattern with quick and shoulder-free results.
Easy to assign fineness structure
Colour coding to prevent the different versions from being mixed up.
- At high rotation speeds, coarse grain acts finer, and at low speeds fine grain acts coarser
- Use tools with a low contact pressure; heavy contact pressure causes premature wear
- If there is insufficient chip removal, do not increase the contact pressure. Instead, use coarser grains
Datasheets(X)
Shadow-free matting, burnishing, polishing and for matching "pre-sanded" metal sheets, achieving impressive surfaces, cleaning oxide coatings and removing discolouration.
For forged steel, malleable iron, grey cast iron, carbon steel, deep drawing steel, steel strip, injection-moulded zinc, non-ferrous metals, Cr-Ni and other stainless steels, as well as wood.
Diameter x width x shaft diameter | 40 x 25 x 6 mm |
Design | Fine |
Colour | Green |
Max. rotation speed | 9000 rpm |
Max. recommended rotation speed | 7500 rpm |
Material to be processed | Forged steel, Malleable cast iron, Grey cast iron, C-steel, Deep-drawn steel, Steels bands, Injection-moulded zinc, Non-ferrous metal, Cr-Ni and other stainless steels, Wood |
Last viewed
Locking hook
REDOSLIDE Z60-HNT/Z100-HNT interior sliding door fitting for ceiling mounting
VDE screwdriver set 14 pieces
Twist drill bits HSS DIN 338 type RN TIN head
Manual caulking gun for cartridges Basic
Partition wall tape B1
Guide drill bit A014C For adapter A2
Hand tap, taper tap HSS DIN 352
Cleaning kit for spray gun ESENCIAL/ADVANCE
Cordless LED hand-held lamp ERGOPOWER PEN+