Abrasive fleece matting body For impressive surfaces, cleaning oxide coatings and removing discolouration
Sanding fleece matting body
MATBDY-FLC-G100-60X40X6MM
Register now and access more than 125,000 products
- At high rotation speeds, coarse grain acts finer, and at low speeds fine grain acts coarser
- Use tools with a low contact pressure; heavy contact pressure causes premature wear
- If there is insufficient chip removal, do not increase the contact pressure. Instead, use coarser grains
Datasheets(X)
Diameter x width x shaft diameter | 60 x 40 x 6 mm |
Max. rotation speed | 10000 1/min |
Max. recommended rotation speed | 5000 1/min |
Material to be processed | Wood, Forged steel, Malleable cast iron, Grey cast iron, C-steel, Deep-drawn steel, Steels bands, Injection-moulded zinc, Non-ferrous metal, Cr-Ni and other stainless steels |
Last viewed
CEE built-in cover For BR 80 wall duct and FB windowsill duct
Abrasive cloth roll For ORSY®10 dispenser systems
HEAVY-DUTY scraper blade with four 90° cutting edges
Shower bar Premium
Circlip DIN 471, AS steel, plain
Ratchet combination wrench
Load securing box For many load-securing applications
Bedding
Hexagonal bolt with shank DIN 931, steel 10.9, plain
Low-cut safety shoes JOB