Abrasive fleece matting body For impressive surfaces, cleaning oxide coatings and removing discolouration
Sanding fleece matting body
MATBDY-FLC-G100-50X30X6MM
Register now and access more than 125,000 products
- At high rotation speeds, coarse grain acts finer, and at low speeds fine grain acts coarser
- Use tools with a low contact pressure; heavy contact pressure causes premature wear
- If there is insufficient chip removal, do not increase the contact pressure. Instead, use coarser grains
Diameter x width x shaft diameter | 50 x 30 x 6 mm |
Max. rotation speed | 12000 1/min |
Max. recommended rotation speed | 6000 1/min |
Material to be processed | Forged steel, Malleable cast iron, Grey cast iron, C-steel, Deep-drawn steel, Steels bands, Injection-moulded zinc, Non-ferrous metal, Cr-Ni and other stainless steels, Wood |
Datasheets(X)
Last viewed
Countersunk tapping screw shape C with H recessed head DIN 7982, A4 stainless steel, plain
End caps set for REDOSLIDE Z40-G sliding door fitting sets
HSS annular cutter
ASSY® 4 WH washer head screw Steel zinc plated partial thread washer head
Plastic tap DN 60 connection
Paper roll Hand towel
Cover plate Type GD
Synthetic corundum flap wheels
Ventilation pipe clamp TIPP® AERO
PVC pneumatic hose
