ASSY<SUP>®</SUP>plus 4 A2 SRCS TERRACE terrace construction screw A2 stainless steel plain partial thread raised countersunk head - SCR-CSMP-TERRACE-DBIT-A2-RW20-5,5X100

ASSY^®plus 4 A2 SRCS TERRACE terrace construction screw A2 stainless steel plain partial thread raised countersunk head

Name: ASSY ® plus 4 A2 SRCS TERRACE terrace construction screw A2 stainless steel plain partial thread raised countersunk head
Brand: Würth
SKU: 0166815510

ASSYplus 4 A2 SRCS terrace A2 PT sm raised cs head RW
SCR-CSMP-TERRACE-DBIT-A2-RW20-5,5X100
ASSYPLUS 4 A2 SRCS TERR.

Art.-no. 0166815510

EAN 4061975503954

All versions

Similar products

Prices for customers after login

ASSY^®plus 4 A2 SRCS TERRACE terrace construction screw A2 stainless steel plain partial thread raised countersunk head

Art.-no. 0166815510

Prices for customers after login

Quantity

x 100 pcs

Exclusively for trade customers

Login/Register
Call customer service: +34928189825

Special partial thread screw with grooved shank made of high quality austenitic A2 stainless steel with small raised countersunk head and milling pockets. Suitable for visually appealing fastening, close to edges, without pre-drilling of terrace floorboards, wooden facades, skirting boards, fences etc. in outdoor areas constantly exposed to weathering.

Ideal power transmission thanks to RW drive

More power due to larger contact area at the bit

More stability, one-handed working, precise positioning due to the tight-fit recess and perfect fit of the bit

Fewer bit changes, one bit for many screw diameters

Compatibility with previous AW drive

Precise positioning and very clean drilling due to advanced centring drill tip

Positioning and drilling without chipping

Maximum drilling performance and precise drilling process through drilling cutting edges (similar to Forstner bits)

Precise positioning on hard surfaces without slipping thanks to centring pin

Quick screwing due to gentle start of thread

Easy countersinking in softwoods and hardwoods

Visually appealing connections due to lens-shaped, rounded head

High milling power and chip collection for clean countersinking of the head in softwood/hardwood

For universal use in wood and metal connections due to milling pockets integrated in the countersunk head

Can be combined with 90° metal countersink

Maximum reliability of the screw connection due to asymmetrical single thread

Optimal matching of drill tip and thread geometry

Excellent anchoring in wood due to asymmetrical arrangement of thread flanks

Stainless mounting for accessible wood connections in outdoor areas exposed to weathering

Made of austenitic, non-magnetic and non-rusting A2 stainless steel

Can be used in rural or urban environments or industrial atmospheres without significant exposure to chlorides or SO₂

With friction-reducing slide coating for easy screwing

Notice

We recommend using the Würth software or the corresponding design aids for planning and dimensioning your assembly. Use the Würth timber construction software for dimensioning of ASSY screws from a diameter of 5 mm

ASSY 4, ASSYplus 4 and ASSYplus 4 FT chipboard screws are optimised for use in wood and wood materials. For applications in plastic anchors where load capacity can also be reduced, use only screws without an optimised thread tip (tip with milling ribs, drill tip, self-clearing groove etc.), such as the ASSY D screws with countersunk head or pan head

ETA-11/0190 approved

The requirements of the European Technical Approval (ETA) must be observed.

Product information

Würth Catalogue

Datasheets(X)

Certificates/ Documents

Application area

For the fixed connection of two wooden elements

The slightly inclined grooves incorporated into the shank area enable two wooden elements to be permanently connected in the assembled state. Any creaking caused by the drying and swelling of the wooden components is reduced. The mechanical fracture properties of the screw are also increased.

For wood-wood connections designed to pull together

A wood-wood connection designed to pull together is possible owing to partial thread starting immediately after the shank. The thread in this case is positioned entirely in the lower second component.

Instructions

For optimum use of the screw, the right-size RW bit must be used

Partial-thread screws are ideal for connecting wooden components. To achieve optimum assembly of the components, the components to be fixed must not be thicker than the length of the shank

ASSY screws are approved for quasi-static loads

ASSY stainless steel screws can be used to attach hardwood terraces and flooring. Pre-drilling is recommended for tropical timber with high bulk density

Additional accessory:

Product

Description

Quantity

Price
/PU

Universal holder E 6.3 (1/4) With quick-change chuck

HOLD-BIT-QCCHUK-1/4INX1/4IN-L51MM

Art.-no. 0614176711

x 1 pcs

1/4-inch bit drill holder

HOLD-BIT-QCCHUK-1/4IN-L60MM

ZEBRA

Art.-no. 0614176760

Quick-change holder, optimised for use of bit drills and bits (shape C 6.3, shape E 6.3 and double bits) with 1/4 inch hexagon drive

x 1 pcs

RW® bit

BIT-RW20-LUMINOUSORANGE-1/4ZO-L25MM

Art.-no. 061470 20

The perfect bit for the new generation of ASSY screws

RW® bit

BIT-RW20-LUMINOUSORANGE-1/4ZO-L50MM

Art.-no. 061471 20

The perfect bit for the new generation of ASSY screws

x 5 pcs

The packaging unit defines the number of articles in one packaging. In the catalog segment you can choose from different packaging units if a pop-up menu is displayed.

Just leave the field empty if you don't know the packaging unit when directly entering the article number in the shopping basket or when importing with v

The article number is made up of the following: VVVVAAABBB
VVVV = 4 digits for prefix number (please note that the first digit is currently always 0)
AAA = 3 digits for dimension part 1
BBB = 3 digits for dimension part 2

Example article number structures:
Example 1: Screw with dimensions of 4x10 mm:
VVVVAAABBB
00574 10 (2 spaces between the 4 and the 10)

Example 2: Screw with dimensions of 10x20 mm:
VVVVAAABBB
005710 20 (1 space between the 10 and the 20)

Example 3: Flat washer with an internal diameter of 6 mm:
VVVVAAABBB
04076

Price per packaging unit (PU):
The displayed price is always in line with the displayed packaging, if the PU is 250 the price for 250 units, if the PU is 300 the price for 300 units.

Price with price key representation (PSL):
The price always applies to a quantity ruled through the price key:
Price for 1 unit
Price for 100 units
Price for 1000 units

The quantity shows the number of pieces or units of measure contained in the order or delivery for the respective article.

In contrast to sales packaging and secondary packaging, the disposal costs for chemical-technical products are shown separately. The breakdown of the individual costs can be found on the relevant products and also in the shopping cart, as well as in our General Terms and Conditions (GTC).