Primer HS PERFECT LINE
2C primer filler PERFECT LINE HS
PRIMFILR-2C-(PERFECT LNE HS)-WHTE-3,5LTR
Register now and access more than 125,000 products
- Excellent adhesion to fillers, primers, fibreglass, cataphoresis (without prior sanding) and sheet metal. Also to PP-EPDM, PP-PE-EPDM and ABS plastics with no need for priming.
- Contains anti-corrosive pigments.
- Easy to sand, starting from P400, resulting in great time savings.
- Available in three colours (white, grey and black), enabling grey scaling to facilitate coverage in all colours on the market.
- Mixture can be adapted according to the application.
- Suitable for all water-based or solvent-based paints for use on automotive and industrial vehicles.
- Isolates filler from the paint, covering its porosity.
- Reduces the risk of paint sinkage on contours, ensuring protection of the sheet metal.
- Dissolvable with acrylic solvent, PR01_5866202304shortening drying and application times.
- Fine spray and great stretching capacity.
- VOC: 444 g/l.
- Coverage achieved in two coats 6-7 m2/l (80 µm/coat).
Apply a greater quantity during the first coat to prevent too much dust when sanding.
Datasheets(X)
Stir for 10 minutes before use. Sand and degrease the surface. Mix with your catalyst of choice in a 100:25 (4:1) volume ratio or in a 100:17 (4:1) weight ratio. Apply with a spray gun.
Drying times with standard catalystPR01_082860611
At 20 °C: Dry to the touch in 15 minutes. Can be sanded after 2 hours and repainted after 3 hours.
At 60 °C: Can be sanded and repainted after 30 minutes.
Infrared drying (at a distance of 80 cm): Evaporation time of 5 minutes and drying time of 7 minutes.
Drying times with fast catalystPR01_082860612
At 20 °C: Dry to the touch in 15 minutes. Can be sanded after 90 minutes and repainted after 2 hours.
At 60 °C: Can be sanded and repainted after 30 minutes.
Infrared drying (at a distance of 80 cm): Evaporation time of 5 minutes and drying time of 7 minutes.
Weight of content | 5.25 kg |
Contents | 3.5 l |
Chemical basis | Acrylic resin |
Colour | White |
Min. flash-off time | 30 min |
Max. processing temperature | 60 °C |
Density | 1.5 kg/l |
Max. temperature resistance | 100 °C |
Density conditions | at 20°C |
Min. processing temperature | 5 °C |
Shelf life from production | 12 Month |
Conditions to maintain shelf life from production | at 20°C |
Select RAL-colour code
!! NOTE: On-screen visualisation of the colour differs from real colour shade!!
Last viewed
Quick-action chuck Metal sleeve
Adhesive film For steering wheel protection
1/4" multi-socket wrench insert bi-hex, multi profile
Fixanchor W-FAZ/A4
HSS annular cutter
Fleece Segmented Grinding Disc For direct use on angle grinders
1/2-inch T-handle
ELMO® device screw box
Blind riveting screw with countersunk head
Guide drill bit A014C For adapter A2