2-component structural adhesive MMA Bond
2C structural adhesive MMA Bond
STRUCADH-2C-(MMA-BOND)-BLACK-50ML
Register now and access more than 125,000 products
- Does not damage surfaces
- Cures at room temperature with short open time
- Very good UV resistance and excellent ageing properties
- Allows gaps of up to 5 mm to be filled
- Outstanding impact, peel and shear strength.
- Exceptional primeless adhesion to materials as metals, lacquered surfaces, aluminum, PVC, glass fiber reinforced plastic, ABS, polycarbonate and plastic materials
Datasheets(X)
Automotive, construction and assembly industries. Adheres brilliantly to a number of surfaces without the use of primer, including metals, painted surfaces, aluminium, PVC, glass-fibre reinforced plastics, ABS, polycarbonate and plastics. Can be painted over with most types of paint.
Clean and dry the surface to be bonded. The surface must be free from dust and grease. Connect the mixing-tube to the cartridge and press out 2 cm. Before use, make sure that the two components are completely mixed. 1:1 Mixing Ratio. Open time ca. 6 minutes at 23°C. After the applying the adhesive, join the parts together (within the open time) and immediately clamp or press. Curing time ca. 20 min at 23°C. Completely curing time: 24 hours at 23°C Note: Higher or lower temperatures than 23°C can have an effect on the opening and curing time.
Contents | 50 ml |
Container | Cartridge |
Chemical basis | Methyl methacrylate |
Colour | Black |
Density/conditions | 1 g/cm³ / at 23°C |
Min./max. processing temperature | 15 to 125 °C |
Shelf life from production/conditions | 9 Month / in sealed cartridge, max. 30°C |
Last viewed
Hexagonal bolt with shank
Slotted countersunk head screw DIN 963, brass, plain
ZD 22 door handle, escutcheon fitting
Knob ZD 21
Drift punch According to DIN 6458
Cylinder saw, HSS bimetal Longlife & Speed HSCo8
Bi-metal band saw M42
Trousers CLASSIC COMBI
Cylindrical pin, unhardened DIN 7, A4 stainless steel, plain
Metric double open-end wrench DIN 3110/ISO 1085