1C liquid plastic fleece inlay for pipes
1C fluid plastic fleece inlay, pipe
FLCINLAY-FLEECE-DUCT-80MM
Register now and access more than 125,000 products
The inlay is a polyester fibre fleece (110 g/m²) with material-strengthening and crack-bridging properties
Authoritative directive: Building Regulation List A, Part 2, No. 2.52, unused roof surfaces.
A minimum layer thickness of 1.8 mm must be maintained.
For roofs with a pitch less than 2 %, a minimum layer thickness of 2.0 mm must be maintained.
An additional fleece must be applied to maintain the minimum seal height of 15 cm!
Datasheets(X)
For reinforcement and checking the layer thickness when applying Pro 1C liquid plastic.
Material | Polyester fibre |
Suitable for pipe diameter | 80 mm |
Coating weight per m² | 110 g |
Width | 40 cm |
Colour | White |
Last viewed
Charger LG 14 For cordless blind rivet gun
External extractor, twin leg, adjustable
Split pin ISO/WN 1234 steel zinc-plated
Universal bag, small
Hexagon Socket Head Cap Screw ISO 4762/DIN 912, ≤ M24 A2-70 stainless steel, ≥ M24 A2-50 stainless steel
System case empty range 8.4.1 transparent
Angle grinder EWS 7-125 BASIC 750 W
Twist drill bit HSCo8 WN TYPE RH
Line routing duct, LFK
Trousers LUMEN PRO HV