1C liquid plastic fleece inlay for corners
1C fluid plastic fleece inlay, corner
FLCINLAY-FLEECE-INSIDECORNER-15CMX15CM
Register now and access more than 125,000 products
The inlay is a polyester fibre fleece (110 g/m²) with material-strengthening and crack-bridging properties
Authoritative directive: Building Regulation List A, Part 2, No. 2.52, unused roof surfaces.
A minimum layer thickness of 1.8 mm must be maintained.
For roofs with a pitch less than 2 %, a minimum layer thickness of 2.0 mm must be maintained.
An additional fleece must be applied to maintain the minimum seal height of 15 cm!
Datasheets(X)
For reinforcement and checking the layer thickness when applying Pro 1C liquid plastic.
Material | Polyester fibre |
Coating weight per m² | 110 g |
Width | 15 cm |
Height | 8 cm |
Length | 15 cm |
Colour | White |
Last viewed
Dirt blaster
Carbon monoxide detector Ei208iDWC
C 6.3 slotted bit (1/4 inch)
Brake line nipple, type TX
C 6.3 TX bit (1/4 inch)
Pneumatic impact ratchet screwdriver DSR 1/2 inch
Twist drill bit HSCo DIN 338 Type RN MFD VARIO
Washer DIN 433, zinc-plated steel, blue passivated (A2K), for cylinder head screw
FILL & CLEAN static mixer
HSS type RN twist drill bit box 19 pieces