1C gun foam superglue foam
1C gun foam PURLOGIC High Tack
GUNFM-1C-PURLOGIC-SEC-750ML
Register now and access more than 125,000 products
- Extremely fast and powerful adhesive properties on all common building materials (except PE, PP, PTFE and silicone)
- Cures quickly
- Resistant to ageing and rotting
- Resistant to a large number of solvents, paints and chemicals
- Not UV-resistant
- Must be protected with silicone, MS polymer or UV-resistant polyurethane
Datasheets(X)
Shake the canister vigorously at least 30 times.
Remove the protective cap and screw the upper end into the gun thread.
Clean, degrease and dampen the surfaces before applying the foam. To remove fresh foam residue, use Würth PU cleaner art. no. 0892160. Hardened foam must be removed mechanically.
Last viewed
Metric combination wrench with POWERDRIV®
Refuse bag Without pull tie
Segment bow handle
Nitrile glove box
C 6.3 TX bit (1/4 inch)
Screwdriver, 1/4 inch With quick-change chuck
1/4-inch and metric ratcheting double box-end wrench For hexagon drive
Pump for 4500-ml hand cleaner
Long-sleeved work polo shirt
Sweatshirt Job+