1C gun foam PURLOGIC XXL Fast
1C gun foam PURLOGIC XXL Fast
GUNFM-1C-(PURLOGIC XXL FAST)-850ML
Register now and access more than 125,000 products
- Fast curing
- No post-expansion, thus precise filling possible
- Economic consumption
- Fewer can changes due to high yield
- Easy to use
It is essential to read the safety instructions in the danger area before using. Wear suitable gloves and safety goggles when working.
Datasheets(X)
Purlogic XXL 850ML demonstrates low expansion and adheres well to most common building surfaces such as wood, cement, porous materials, stone, metal and aluminium. Does not adhere to PE, silicone or PTFE.
Shake the canister vigorously at least 20 times before use. Clean, degrease and dampen the surfaces before applying the foam. Moisten again if several foam beads are applied. Use Würth PU cleaner art. no. 0892 160 to remove fresh foam residue. Remove cured foam mechanically.
Chemical basis | 1-component polyurethane hybrid adhesive |
Colour | Yellow |
Smell/fragrance | Characteristic |
Moulded density | 19 kg/m³ |
Tack-free after | 2 min |
Can be cut after | 10 min |
Full resilience | 45 min |
Min. processing temperature | 5 °C |
Max. processing temperature | 25 °C |
Min. surface processing temperature | 5 °C |
Max. surface processing temperature | 25 °C |
Min. processing temperature for can | 20 °C |
Max. processing temperature for can | 25 °C |
Min. temperature resistance | -40 °C |
Max. temperature resistance | 90 °C |
Building material class | E - Normally inflammable |
Building material class conditions | in accordance with DIN EN 13501 |
Heat conductance λ | 0.036 W/(m*K) |
Heat conductance λ conditions | in accordance with DIN 52612 |
Water absorption (%) | 1 Vol-% |
Water absorption conditions | in accordance with DIN 53428 |
Min. tensile strength | 0.17 MPa |
Yield (volume) approx. | 60 l |
Contents | 850 ml |
Container | Aerosol can |
Weight of content | 890 g |
Shelf life from production | 12 Month |
Conditions to maintain shelf life from production | at 5°C to 25°C |
Last viewed
Hook-and-loop backing pad For EPM 160-E
Vernier callipers, digital
Hexagon Socket Head Cap Screw ISO 4762/DIN 912, steel 8.8, plain
1/2" multi-socket wrench one tool for all applications
1-ear clamp with insert ring
Air spiral line, universal
Floor nozzle
Screwdriver handle with hex bolster
Machinist's hammer German design in accordance with DIN 1041
Cleaning set ICSS 300-P