1C combination foam PURLOGIC DUO
1C combination foam PURLOGIC Duo
COMBIFM-1C-(PURLOGIC DUO)-GREY-750ML
Register now and access more than 125,000 products
- Grey colour for a more diverse range of applications e.g. in concrete and window areas
- Better heat and sound insulation than mineral wool, cork or fibreglass
- Excellent cell structure
- Fast curing
- Resistant to ageing and rotting
- Not UV-resistant
- Resistant to a large number of solvents, paints and chemicals
- Must be protected with silicone, MS polymer or UV-resistant polyurethane
All common construction surfaces such as concrete, masonry, stone, plaster, wood, corrosion-protected metal, polystyrene, PIR/PUR hard foam, polyester and hard PVC. Does not adhere to PE, PP, PTFE and silicone.
The usage instructions are recommendations based on the tests we have conducted and on our experience; carry out your own tests before each application. Due to the large number of applications and storage and processing conditions, we do not assume any liability for a specific application result. Insofar as our free customer service provides technical information or acts as an advisory service, no responsibility is assumed by this service except where the advice or information given was part of our specified, contractually agreed service or the advisor was acting deliberately. We guarantee the consistent quality of our products. We reserve the right to make technical changes and further develop products.
Datasheets(X)
For filling, gluing and insulating windows, doors, pipe and wall openings and in perimeter areas
Shake the canister vigorously at least 20 times. Remove the protective cap and screw the upper end into the gun thread or press the tube adapter into the female thread and screw in by 90°. Clean, degrease and moisten the surfaces before using the foam. To remove fresh foam residue, use Würth PU cleaner art. no. 0892 160. Hardened foam must be removed mechanically.
Chemical basis | Single component polyurethane |
Colour | Grey |
Moulded density | 20 kg/m³ |
Tack-free after | 10 min |
Conditions for being tack-free | at 23°C and 50% humidity |
Can be cut after | 45 min |
Conditions for ability to cut | at 23°C and 50% relative humidity |
Full resilience | 24 h |
Conditions for full resilience | at 23°C and 50% relative humidity |
Min./max. surface processing temperature | -5 to 35 °C |
Min./max. ambient processing temperature | -5 to 35 °C |
Min. ambient processing temperature | -5 °C |
Max. ambient processing temperature | 35 °C |
Min. surface processing temperature | -5 °C |
Max. surface processing temperature | 35 °C |
Min. temperature resistance | -40 °C |
Max. temperature resistance | 90 °C |
Building material class | B3 - Of high flammability |
Building material class conditions | in accordance with DIN 4102-1 |
Yield (volume) approx. | 47 l |
Conditions for yield | Tested in accordance with Würth test methods |
Contents | 750 ml |
Weight of content | 773 g |
Shelf life from production | 12 Month |
Conditions to maintain shelf life from production | at 10°C to 30°C |
Select RAL-colour code
!! NOTE: On-screen visualisation of the colour differs from real colour shade!!
Last viewed
ELMO® device screw
Metric double open-end wrench DIN 3110/ISO 1085
Interior door mortise lock, BB class 2
AL 11 long plate pair
Electric orbital sander ESS 115-2 With universal clamping system
Double ring ratchet wrench set 32 pieces
Premium spade chisel with SDS-max drive arbour
1/4-inch socket wrench insert For TX screws
High-performance gas unit DIGA® CS-3
Medium-strength flange sealant